Curtis Industries 30EB66 Equivalent & Substitute Parts Reference

Part Overview

Curtis Industries part number 30EB66 is a Single Phase EMC/EMI Line Filter rated for 30 A at 250V AC and is currently classified as Obsolete. The filter is designed for general purpose applications, featuring single stage filtering, chassis mounting, and quick connect termination. Due to its obsolete status, sourcing direct replacements is necessary for continued maintenance, repair, or design compatibility in assemblies that specify this model.

Substiute Parts

30EB66

Curtis IndustriesIn Stock: 119430EB66 Datasheet

Current PartRFQ

F1199DD30

Curtis IndustriesIn Stock: 971F1199DD30 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for Curtis Industries 30EB66 is based strictly on matching the following electrical and mechanical parameters provided:

• Voltage rating (AC): 250V
• Current rating: 30 A
• Frequency: 50/60Hz
• Filter type: Single Phase
• Configuration: Single Stage
• Mounting type: Chassis Mount
• Termination style
• Application: General Purpose
• Applicable certification agencies
• RoHS and REACH status

Only parts that fully align with these criteria are included as substitutes for direct replacement compatibility.

Parameter Comparison

Engineering Selection Recommendations

The main part 30EB66 is Obsolete, whereas F1199DD30 is listed as Active and available in inventory. Both parts are manufactured by Curtis Industries and share identical electrical and filter characteristics, including the same voltage, current, frequency, phase, configuration, and mounting style. The substitute F1199DD30 differs only in termination style (Threaded Post (8-32) vs. Quick Connect) and holds updated RoHS compliance (ROHS3 Compliant) and additional agency approvals. Selection between these parts should be based on product lifecycle status and regulatory compliance alignment.

Frequently Asked Questions (FAQ)

Q1: Can F1199DD30 fully replace 30EB66 in a general-purpose chassis-mount single-phase filtering application?
A1: F1199DD30 matches all critical electrical and mechanical parameters of 30EB66, with the only difference being termination style. Both are chassis mount, single-phase, single-stage, and rated for 250V AC, 30 A at 50/60Hz.

Q2: Is there a difference in regulatory compliance between 30EB66 and F1199DD30?
A2: F1199DD30 is ROHS3 compliant, while 30EB66 is RoHS non-compliant. Both parts are REACH unaffected.

Q3: What consideration should be made regarding termination style substitution?
A3: 30EB66 uses Quick Connect terminals; F1199DD30 uses Threaded Post (8-32). Connector compatibility and mounting hardware must match assembly requirements.

Q4: Is there a difference in approval agency certifications between these parts?
A4: 30EB66 is certified to CSA, UR, VDE; F1199DD30 expands this to CE, CSA, TUV, UR.

Q5: Are both products suitable for the same general-purpose filtering application?
A5: Yes, both are specified for general-purpose use at the listed ratings and configurations. Compatibility should be verified against termination and mounting specifics as detailed.