2SD2702TL Equivalent & Substitute Parts Reference

Part Overview

The Rohm Semiconductor 2SD2702TL is an active Bipolar Junction Transistor (BJT), categorized under Transistors, Bipolar (BJT), designed for surface mount applications with a TUMT3 package. It features an NPN transistor type, collector-emitter voltage rating of 12V, collector current capability of 1.5A, and a transition frequency of 400MHz. Engineers may seek alternative models to ensure flexibility in supply chain management, accommodate stock availability, or maintain compliance with certification requirements.

Substiute Parts

2SD2702TL

Rohm SemiconductorIn Stock: 10092SD2702TL Datasheet

Current PartRFQ

2SD2700TL

Rohm SemiconductorIn Stock: 44472SD2700TL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for 2SD2702TL are selected strictly based on matching or exceeding electrical and mechanical parameters specified for this category. Key allowable parameters for substitution are:

• Manufacturer
• Transistor Type (NPN)
• Voltage - Collector Emitter Breakdown (Max)
• Current - Collector (Ic) (Max)
• Vce Saturation (Max) @ Ib, Ic
• Current - Collector Cutoff (Max)
• DC Current Gain (hFE) (Min) @ Ic, Vce
• Power - Max
• Frequency - Transition
• Operating Temperature
• Mounting Type
• Package / Case
• Supplier Device Package
• RoHS and REACH Compliance
• Product Status

Parameter Comparison

Engineering Selection Recommendations

Both 2SD2702TL and 2SD2700TL are listed as active products with ROHS3 and REACH compliance, as well as unlimited moisture sensitivity levels (MSL 1). These compliance parameters permit direct substitution within this product category in applications where certification status must be maintained.

Frequently Asked Questions (FAQ)

Q1: What substitution criteria are applied for the 2SD2702TL Bipolar (BJT) transistor?
A1: Substitution is based strictly on identical or superior ratings for transistor type, voltage and current specifications, package type, compliance certifications (RoHS/REACH), operating conditions, and mounting style.

Q2: Is the package and footprint identical between 2SD2702TL and its substitute 2SD2700TL?
A2: Both 2SD2702TL and 2SD2700TL utilize the TUMT3 surface mount package with 3-SMD, Flat Leads configuration.

Q3: Are there any differences in electrical performance between 2SD2702TL and 2SD2700TL?
A3: 2SD2700TL has a higher maximum collector current rating (2A vs. 1.5A) and a lower maximum Vce saturation voltage at different test conditions. Frequency transition is 400MHz for 2SD2702TL and 360MHz for 2SD2700TL; all other main parameters match.

Q4: Are all compliance and certification parameters equivalent between the parts?
A4: Both parts are ROHS3 compliant, unaffected by REACH, have unlimited moisture sensitivity level, and are classified as active.

Q5: What mechanical considerations must be observed during substitution?
A5: Both parts share identical mounting type, package, and supplier device package—ensuring mechanical equivalency within the TUMT3 package for surface mount assembly.