2DB1386Q-13 Equivalent & Substitute Parts

Part Overview

The 2DB1386Q-13 is a Surface Mount PNP Bipolar Junction Transistor manufactured by Diodes Incorporated, rated for 20V collector-emitter breakdown voltage and 5A maximum collector current. Housed in a SOT-89-3 package, this transistor operates across an extended temperature range of -55°C to 150°C and delivers 1W maximum power dissipation with a 100MHz transition frequency. The device is RoHS3 compliant and carries an MSL rating of 1 (Unlimited), indicating robust moisture tolerance for standard manufacturing environments.

Substitute parts are necessary when the primary component becomes unavailable, when supply chain constraints require alternative sourcing, or when design flexibility permits selection from qualified alternatives that meet or exceed the electrical and mechanical specifications of the original part.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Voltage - Collector Emitter Breakdown (Max)	20	V
Current - Collector (Ic) (Max)	5	A
Power - Max	1	W
Frequency - Transition	100	MHz
Operating Temperature Range	-55 to 150	°C
Package / Case	TO-243AA (SOT-89-3)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
MSL Rating	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution eligibility for the 2DB1386Q-13 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Transistor Type: PNP (mandatory)
Voltage - Collector Emitter Breakdown (Max): 20V (minimum requirement)
Current - Collector (Ic) (Max): 5A or greater (minimum requirement)
Package / Case: TO-243AA or compatible surface mount package
Mounting Type: Surface Mount
RoHS Status: ROHS3 Compliant
MSL Rating: 1 (Unlimited)

Secondary Compatibility Factors:

Operating Temperature Range: Must encompass or exceed -55°C to 150°C
Power Dissipation: Must support 1W or greater
Frequency - Transition: 100MHz or greater

Substitute parts are grouped into two categories based on current rating alignment:

Category A - Direct Current Rating Match (5A): Parts with Ic (Max) of 5A or 5.1A maintain electrical equivalence with the original device and support identical application requirements without derating.

Category B - Reduced Current Rating (1A to 3A): Parts with lower Ic ratings are suitable only for applications where the actual operating current does not exceed the substitute part's maximum rating. These parts are not interchangeable for all applications.

Category C - Package Variant (SOT-23-3): The NSS20200LT1G operates in a different surface mount package (SOT-23-3 instead of SOT-89-3) and requires PCB layout modification. Electrical parameters remain compatible.

Parameter Comparison

Parameter	2DB1386Q-13	BC869,115	BC869-25,115	NSS20200LT1G	PBSS302PX,115	PBSS5320X,135	PBSS5520X,135
Manufacturer	Diodes Inc.	Nexperia USA Inc.	Nexperia USA Inc.	onsemi	Nexperia USA Inc.	Nexperia USA Inc.	Nexperia USA Inc.
Transistor Type	PNP	PNP	PNP	PNP	PNP	PNP	PNP
Ic (Max)	5 A	1 A	2 A	2 A	5.1 A	3 A	5 A
Voltage - Collector Emitter Breakdown (Max)	20 V	20 V	20 V	20 V	20 V	20 V	20 V
Vce Saturation (Max)	1 V @ 100mA, 4A	500 mV @ 100mA, 1A	600 mV @ 200mA, 2A	180 mV @ 200mA, 2A	230 mV @ 255mA, 5.1A	300 mV @ 300mA, 3A	270 mV @ 500mA, 5A
Power - Max	1 W	1.2 W	500 mW	460 mW	2.1 W	1.6 W	1.6 W
Frequency - Transition	100 MHz	140 MHz	140 MHz	100 MHz	130 MHz	100 MHz	100 MHz
Operating Temperature (Max)	150°C	150°C	150°C	150°C	150°C	150°C	150°C
Package / Case	TO-243AA (SOT-89-3)	TO-243AA (SOT-89)	TO-243AA (SOT-89)	TO-236-3 (SOT-23-3)	TO-243AA (SOT-89)	TO-243AA (SOT-89)	TO-243AA (SOT-89)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Grade	—	Automotive	Automotive	—	Automotive	Automotive	Automotive
Qualification	—	AEC-Q100	AEC-Q100	—	AEC-Q100	AEC-Q100	AEC-Q100

Engineering Selection Recommendations

Direct Substitutes (Recommended for Full Compatibility):

The PBSS5520X,135 and PBSS302PX,115 are the primary recommended substitutes for the 2DB1386Q-13. Both devices maintain the identical 5A collector current rating, 20V breakdown voltage, and TO-243AA (SOT-89) package footprint. The PBSS5520X,135 matches the original part's 100MHz transition frequency and 1.6W power rating, ensuring electrical equivalence across all critical parameters. The PBSS302PX,135 provides enhanced power dissipation (2.1W) and higher transition frequency (130MHz), offering performance headroom for demanding applications. Both Nexperia parts carry AEC-Q100 automotive qualification, indicating compliance with automotive-grade reliability standards.

Conditional Substitutes (Application-Dependent):

The BC869,115 and BC869-25,115 are suitable substitutes only when the application's actual operating current does not exceed 1A and 2A respectively. These parts offer higher transition frequencies (140MHz) and automotive qualification but are not interchangeable for applications requiring the full 5A capability of the original device. The NSS20200LT1G from onsemi provides 2A current capability and superior saturation voltage performance (180mV) but requires PCB layout modification due to its SOT-23-3 package variant. This part is suitable for space-constrained designs where the reduced package footprint justifies the layout redesign.

The PBSS5320X,135 provides 3A current capability and is suitable for applications where the actual operating current remains below 3A. This part offers automotive qualification and AEC-Q100 compliance.

Compliance and Certification:

All recommended substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity ratings, ensuring compatibility with standard manufacturing processes. The Nexperia parts (BC869 series, PBSS series) carry AEC-Q100 automotive qualification, suitable for automotive and industrial applications requiring enhanced reliability documentation. The onsemi NSS20200LT1G does not carry automotive qualification but maintains full RoHS3 compliance for general industrial applications.

Frequently Asked Questions (FAQ)

Q: Can the BC869,115 replace the 2DB1386Q-13 in all applications?

A: No. The BC869,115 is rated for 1A maximum collector current, while the 2DB1386Q-13 is rated for 5A. The BC869,115 is suitable only for applications where the actual operating current does not exceed 1A. For applications requiring the full 5A capability, use PBSS5520X,135 or PBSS302PX,115.

Q: What is the difference between the PBSS5520X,135 and PBSS302PX,115?

A: Both parts maintain 5A collector current and 20V breakdown voltage. The PBSS302PX,115 provides higher power dissipation (2.1W versus 1.6W) and higher transition frequency (130MHz versus 100MHz). The PBSS5520X,135 matches the original part's 100MHz frequency. Select PBSS302PX,115 for applications requiring enhanced thermal performance or higher frequency operation.

Q: Can I use the NSS20200LT1G as a direct replacement?

A: The NSS20200LT1G is electrically compatible for applications requiring 2A or less collector current. However, it uses a SOT-23-3 package instead of the SOT-89-3 package of the original part. PCB layout modification is required. The NSS20200LT1G offers superior saturation voltage performance (180mV) and is suitable for space-constrained designs.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and carry MSL 1 (Unlimited) ratings, ensuring compatibility with standard surface mount assembly processes.

Q: Which substitute parts carry automotive qualification?

A: The BC869,115, BC869-25,115, PBSS302PX,115, PBSS5320X,135, and PBSS5520X,135 all carry AEC-Q100 automotive qualification. The NSS20200LT1G does not carry automotive qualification but is suitable for general industrial applications.

Q: What is the key parameter that determines substitution eligibility?

A: The primary substitution criteria are: PNP transistor type, 20V minimum collector-emitter breakdown voltage, and collector current rating equal to or greater than the application requirement. All substitute parts must maintain TO-243AA or compatible surface mount packaging, RoHS3 compliance, and MSL 1 rating.

Q: Can I substitute a lower-current part if my application uses less current?

A: Yes, provided the actual operating current does not exceed the substitute part's maximum rating. For example, if your application operates at 2A, the BC869-25,115 (2A rated) or NSS20200LT1G (2A rated) are suitable. However, for applications requiring 5A capability, only PBSS5520X,135 or PBSS302PX,115 are appropriate.

Q: What is the difference in saturation voltage between the original part and substitutes?

A: The 2DB1386Q-13 exhibits 1V saturation voltage at 100mA/4A. The PBSS5520X,135 shows 270mV at 500mA/5A, and the NSS20200LT1G shows 180mV at 200mA/2A. Lower saturation voltage indicates reduced power loss during saturation, which may improve efficiency in switching applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message