Phoenix Contact 2962735 Interface Module Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 2962735 is a 15-position interface module terminal block designed for screw connection to D-Sub female connectors. This component serves as a process-to-control interface adapter, enabling reliable signal transmission between terminal block systems and D-Sub connector assemblies. The part is currently active in production with full RoHS compliance and maintains a substantial inventory position. Equivalent and substitute parts are identified to support procurement flexibility, design revisions, and supply chain continuity.

Substiute Parts

2962735

Phoenix ContactIn Stock: 7072962735 Datasheet

Current PartRFQ

2315175

Phoenix ContactIn Stock: 8012315175 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 2962735 is determined by the following critical parameters:

Mandatory Matching Criteria:

• Positions / Poles: 15
• Process Side Connection: Terminal Blocks - Screw Connection
• Control Side Connection: D-Sub, Female
• Voltage - Rated: 125V
• Operating Temperature Range: -20°C ~ 50°C

Allowable Variation Parameters:

• Wire Gauge: Acceptable range overlap (12-26 AWG encompasses both 16-26 AWG and 12-24 AWG)
• Current Rating: Minimum 2.0 A per contact (2962735 rated at 2.5 A; substitute rated at 2.0 A)
• Physical Dimensions: Variation permitted within mechanical envelope constraints
• Series Designation: Different series within VARIOFACE product line
• Packaging Format: Bulk or Box packaging
• RoHS Compliance Status: Both RoHS and ROHS3 compliant variants acceptable

The Phoenix Contact 2315175 meets all mandatory matching criteria and falls within allowable variation parameters for wire gauge and current rating, qualifying it as a valid substitute part.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (2962735): Use the Phoenix Contact 2962735 when the application requires the UM series interface module with 2.5 A per-contact current rating and the specified physical dimensions (65.00mm length × 45.00mm width). This part maintains active production status with full RoHS compliance.

Substitute Selection (2315175): The Phoenix Contact 2315175 qualifies as a substitute when:

• Application current requirements do not exceed 2.0 A per contact
• Wire gauge requirements fall within the 16-24 AWG overlap range
• Mechanical envelope accommodates the alternate dimensions (45.00mm length × 65.50mm width)
• VIP series interface module is acceptable for the design
• ROHS3 compliance status meets regulatory requirements

Both parts maintain active product status and are manufactured by Phoenix Contact, ensuring consistent quality and support. The substitute part carries REACH compliance designation, which may be relevant for specific regulatory jurisdictions.

Frequently Asked Questions (FAQ)

Q: Can the 2315175 be used as a direct drop-in replacement for the 2962735?

A: The 2315175 is functionally equivalent for signal interface applications but requires verification of three factors: (1) application current per contact must not exceed 2.0 A, (2) mechanical dimensions must fit the available space (note the length and width are transposed), and (3) wire gauge must fall within the 16-24 AWG overlap range.

Q: What is the significance of the wire gauge difference (16-26 AWG vs. 12-24 AWG)?

A: The wire gauge range indicates the acceptable conductor sizes for screw terminal connection. The overlapping range of 16-24 AWG is compatible with both parts. If your application uses 25-26 AWG conductors, only the 2962735 is suitable. If your application uses 12-15 AWG conductors, only the 2315175 is suitable.

Q: How does the current rating difference affect substitution?

A: The 2962735 is rated for 2.5 A per contact, while the 2315175 is rated for 2.0 A per contact. If your application requires continuous current above 2.0 A per contact, the 2962735 must be used. For applications at or below 2.0 A per contact, the 2315175 is acceptable.

Q: Are the physical dimensions interchangeable?

A: No. The 2962735 measures 65.00mm length × 45.00mm width, while the 2315175 measures 45.00mm length × 65.50mm width. The dimensions are transposed and slightly different. Verify that your mechanical design accommodates the substitute part's footprint before selection.

Q: What is the difference between RoHS and ROHS3 compliance?

A: Both designations indicate compliance with Restriction of Hazardous Substances regulations. ROHS3 represents the updated standard. Both parts are compliant and suitable for applications with RoHS requirements.

Q: Does the packaging format (Bulk vs. Box) affect technical compatibility?

A: No. Packaging format affects only logistics and inventory management, not electrical or mechanical compatibility. Both packaging options contain identical components.

Q: Which part should I select for new designs?

A: For new designs, either part is acceptable provided the application parameters fall within the allowable ranges for the selected part. Verify wire gauge requirements, current per contact, and mechanical dimensions against your specific application before final selection.