Honeywell 26PCCFJ3G Pressure Sensor Equivalent & Substitute Parts

Part Overview

The Honeywell 26PCCFJ3G is an active, board-mount pressure sensor designed for compound pressure measurement applications. This 4-SIP module sensor operates within a ±15PSI (±103.42kPa) range with Wheatstone Bridge output and temperature compensation. The part is RoHS compliant and currently in active production status with 843 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for component procurement, inventory management, or design flexibility while maintaining functional compatibility.

Substiute Parts

26PCCFJ3G

Honeywell Sensing and Productivity SolutionsIn Stock: 86326PCCFJ3G Datasheet

Current PartRFQ

26PCCFJ2G

Honeywell Sensing and Productivity SolutionsIn Stock: 89926PCCFJ2G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 26PCCFJ3G are identified based on strict equivalence of the following critical parameters:

Electrical Parameters: Operating pressure range (±15PSI / ±103.42kPa), output type (Wheatstone Bridge), output range (0 mV ~ 100 mV at 10V), accuracy (±0.5%), and supply voltage range (2.5V ~ 16V) must remain identical.

Mechanical Parameters: Port size (Male - 0.07" / 1.78mm tube), port style (Needle), termination style (PC Pin), mounting type (Through Hole), and package type (4-SIP Module) must be unchanged.

Environmental & Compliance Parameters: Operating temperature range (-40°C ~ 85°C), temperature compensation feature, maximum pressure rating (±45PSI / ±310.26kPa), RoHS compliance, and MSL rating (1 / Unlimited) must be maintained.

Series & Manufacturer: All substitutes must belong to the Honeywell 26PC series and be manufactured by Honeywell Sensing and Productivity Solutions.

The only allowable variation is packaging configuration (tape/reel versus bulk), which does not affect electrical or mechanical functionality.

Parameter Comparison

Engineering Selection Recommendations

Both the 26PCCFJ3G and 26PCCFJ2G are active production parts manufactured by Honeywell Sensing and Productivity Solutions within the 26PC series. Both parts maintain identical electrical specifications, mechanical interfaces, and environmental operating parameters. The parts are functionally interchangeable for all circuit design and application requirements.

The distinction between these parts is packaging configuration only. The 26PCCFJ3G is supplied in tape/reel format, while the 26PCCFJ2G is supplied in bulk packaging. This difference affects procurement logistics and inventory handling but does not impact electrical performance, mechanical fit, or thermal characteristics.

Both parts are RoHS compliant with MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling. Selection between these parts should be based on procurement requirements, inventory management practices, and supply chain logistics rather than technical performance criteria.

Frequently Asked Questions (FAQ)

Q: Can the 26PCCFJ2G be used as a direct replacement for the 26PCCFJ3G in an existing circuit design?

A: Yes. The 26PCCFJ2G is electrically and mechanically identical to the 26PCCFJ3G. All electrical parameters, output characteristics, operating ranges, and mechanical interfaces are equivalent. The only difference is packaging format (bulk versus tape/reel).

Q: What is the difference between the 26PCCFJ3G and 26PCCFJ2G?

A: The parts are identical in all functional and technical specifications. The 26PCCFJ3G is packaged in tape/reel format, while the 26PCCFJ2G is packaged in bulk. This affects how the parts are supplied and handled during procurement and assembly but does not affect performance.

Q: Are both parts RoHS compliant?

A: Yes. Both the 26PCCFJ3G and 26PCCFJ2G are RoHS compliant and carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions.

Q: What are the critical parameters that define substitutability for this pressure sensor?

A: Substitutability is determined by operating pressure (±15PSI), pressure type (Compound), output type (Wheatstone Bridge), output range (0 mV ~ 100 mV), accuracy (±0.5%), supply voltage (2.5V ~ 16V), port size (Male - 0.07" tube), port style (Needle), termination style (PC Pin), mounting type (Through Hole), package type (4-SIP Module), operating temperature (-40°C ~ 85°C), and temperature compensation feature. All these parameters must remain identical for substitution.

Q: Can I substitute a different pressure range sensor for the 26PCCFJ3G?

A: No. The operating pressure range (±15PSI / ±103.42kPa) is a critical specification. Sensors with different pressure ranges are not substitutable, as they will produce different output signals for the same input pressure and will not function correctly in the circuit design.

Q: What is the maximum pressure rating for these sensors?

A: Both the 26PCCFJ3G and 26PCCFJ2G have a maximum pressure rating of ±45PSI (±310.26kPa), which is three times the operating pressure range. This provides overpressure protection margin.

Q: Are there any temperature-related considerations for substitution?

A: Both parts operate across the identical temperature range of -40°C to 85°C and include temperature compensation features. No temperature-related substitution restrictions apply.

Q: What is the supply voltage requirement for these sensors?

A: Both parts require a supply voltage between 2.5V and 16V. The circuit design must provide voltage within this range for proper sensor operation.