26150C Equivalent & Substitute Parts

Part Overview

The 26150C is a 15 µH unshielded wirewound inductor manufactured by Murata Power Solutions, rated for 2.27 A continuous current with a maximum DC resistance of 90mOhm. This surface mount component operates across the temperature range of -40°C to 85°C and is classified as Active product status with ROHS3 compliance. Alternative components may be required due to inventory constraints, application-specific performance requirements, or supply chain considerations.

Substiute Parts

26150C

Murata Power SolutionsIn Stock: 100426150C Datasheet

Current PartRFQ

SDR1006-150ML

Bourns Inc.In Stock: 1874SDR1006-150ML Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The SDR1006-150ML from Bourns Inc. qualifies as a direct substitute based on the following critical parameters:

• Inductance Match: Both components provide 15 µH inductance at 1 kHz test frequency
• Current Rating Compatibility: The substitute's 2.25 A rating remains within acceptable tolerance of the primary part's 2.27 A specification
• DC Resistance: The substitute's 80mOhm maximum DCR is lower than the primary part's 90mOhm, providing improved efficiency
• Shielding Configuration: Both are unshielded designs
• Surface Mount Compatibility: Both utilize surface mount technology with nonstandard package dimensions
• Thermal Operating Range: The substitute extends to 125°C, exceeding the primary part's 85°C maximum
• Compliance: Both maintain ROHS3 compliance and REACH unaffected status

Parameter Comparison

Engineering Selection Recommendations

Both the 26150C and SDR1006-150ML maintain Active product status with full ROHS3 compliance and REACH unaffected certification. The SDR1006-150ML offers superior DC resistance characteristics at 80mOhm compared to the primary part's 90mOhm specification, resulting in lower power dissipation. The substitute component's extended operating temperature range to 125°C provides additional thermal margin for applications operating near the primary part's 85°C limit. Both components are certified for unlimited moisture sensitivity exposure. Selection between these components should be based on specific application thermal requirements and DC resistance performance criteria.

Frequently Asked Questions (FAQ)

Q: Can the SDR1006-150ML directly replace the 26150C in existing designs?

A: Yes. Both components share identical 15 µH inductance specifications, unshielded configuration, surface mount technology, and nonstandard package classification. The substitute's 2.25 A current rating is compatible with the primary part's 2.27 A specification for standard applications.

Q: What are the physical dimension differences between these components?

A: The 26150C measures 0.394" L x 0.354" W (10.00mm x 9.00mm) with a seated height of 0.228" (5.80mm). The SDR1006-150ML measures 0.386" L x 0.386" W (9.80mm x 9.80mm) with an identical seated height of 0.228" (5.80mm). Both components fit the same nonstandard package classification.

Q: How do the DC resistance values affect component selection?

A: The SDR1006-150ML's 80mOhm maximum DCR is lower than the 26150C's 90mOhm maximum, resulting in reduced resistive losses and improved efficiency. This characteristic makes the substitute preferable for applications where power dissipation is a design constraint.

Q: Are there temperature range considerations for substitution?

A: The SDR1006-150ML operates to 125°C maximum, compared to the 26150C's 85°C limit. Applications requiring operation near or above 85°C should utilize the substitute component. Both components maintain full performance across the -40°C lower temperature limit.

Q: Do both components meet the same compliance standards?

A: Yes. Both the 26150C and SDR1006-150ML are ROHS3 compliant, REACH unaffected, and classified as Moisture Sensitivity Level 1 (Unlimited). Both carry EAR99 ECCN classification and identical HTSUS code 8504.50.4000.