24101C Equivalent & Substitute Parts

Part Overview

The 24101C is a 100 µH unshielded wirewound surface mount inductor manufactured by Murata Power Solutions Inc., rated for 520 mA continuous current with a maximum DC resistance of 700mOhm. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Equivalent parts are identified when electrical characteristics, mechanical dimensions, and environmental ratings align within acceptable tolerances for the application requirements.

Substiute Parts

24101C

Murata Power Solutions Inc.In Stock: 244524101C Datasheet

Current PartRFQ

SDR0604-101KL

Bourns Inc.In Stock: 9061SDR0604-101KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 24101C is determined by the following critical parameters:

• Inductance value of 100 µH at 1 kHz test frequency
• Current rating minimum of 520 mA
• DC resistance not exceeding 700mOhm
• Unshielded configuration
• Surface mount technology
• Operating temperature range encompassing -40°C to 85°C
• RoHS3 compliance certification
• Nonstandard package dimensions compatible with 5.80mm × 5.20mm footprint

The SDR0604-101KL from Bourns Inc. meets these substitution criteria with equivalent electrical performance and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the 24101C and SDR0604-101KL maintain Active product status with full RoHS3 compliance and REACH unaffected certification. The SDR0604-101KL provides an extended operating temperature range to 125°C, which accommodates applications requiring higher thermal margins beyond the 24101C specification of 85°C maximum. The Bourns component features a ferrite drum core construction with specified inductance tolerance of ±10% and saturation current rating of 680mA, providing additional performance definition. Mechanical compatibility is maintained within the nonstandard surface mount package category, though dimensional variance in width (5.80mm vs 5.20mm) and height (4.80mm vs 4.50mm) must be verified against PCB layout constraints.

Frequently Asked Questions (FAQ)

Q: Can the SDR0604-101KL directly replace the 24101C in all applications?

A: Electrical substitution is valid when inductance, current rating, and DC resistance requirements are met. Physical board layout must accommodate the SDR0604-101KL width of 5.80mm and height of 4.80mm compared to the 24101C dimensions of 5.20mm width and 4.50mm height.

Q: What is the significance of the inductance tolerance specification?

A: The SDR0604-101KL specifies ±10% inductance tolerance, while the 24101C tolerance is not provided in the datasheet. Applications requiring tighter inductance control should reference manufacturer documentation for the 24101C tolerance specification.

Q: Does the extended temperature range of the SDR0604-101KL affect substitution suitability?

A: The SDR0604-101KL operating range of -40°C to 125°C encompasses the 24101C range of -40°C to 85°C. Extended temperature capability does not compromise substitution for applications within the 24101C temperature specification.

Q: Are there differences in core material construction between these parts?

A: The 24101C uses wirewound construction with unspecified core material. The SDR0604-101KL uses drum core ferrite wirewound construction. Both maintain unshielded configuration and equivalent electrical performance at rated specifications.

Q: What packaging considerations apply to these components?

A: Both components use Tape & Reel (TR) packaging suitable for automated assembly. Nonstandard package classification requires verification of pick-and-place compatibility and feeder specifications with assembly equipment.