Bourns 2114-H Fixed Inductor Equivalent & Substitute Parts

Part Overview

The Bourns 2114-H is a 150 µH unshielded toroidal inductor rated for 3.4 A continuous current with a maximum DC resistance of 62 mOhm. This through-hole component operates across the temperature range of -55°C to 105°C and is part of the 2100 series inductor family.

The 2114-H has been designated as obsolete. Locating active production alternatives is necessary to ensure supply chain continuity and support for new designs or component replenishment in existing applications.

Substiute Parts

2114-H

Bourns Inc.In Stock: 10422114-H Datasheet

Current PartRFQ

2114-H-RC

Bourns Inc.In Stock: 38242114-H-RC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 2114-H is determined by strict equivalence across the following electrical and mechanical parameters:

• Inductance value: 150 µH
• Inductance tolerance: ±15%
• Current rating: 3.4 A
• DC resistance: 62 mOhm maximum
• Toroidal type, unshielded configuration
• Through-hole radial, horizontal mounting
• Physical dimensions: 0.860" diameter, 0.450" maximum seated height
• Operating temperature range: -55°C to 105°C

The 2114-H-RC meets all these criteria and is manufactured by Bourns Inc. under the same 2100 series designation. The substitute differs only in product status (active versus obsolete) and packaging configuration (bulk versus tape/reel), with improved RoHS compliance status.

Parameter Comparison

Engineering Selection Recommendations

The 2114-H-RC is the direct functional equivalent of the 2114-H. Both components share identical electrical specifications and mechanical form factors. The primary distinction is product lifecycle status: the 2114-H is obsolete, while the 2114-H-RC remains in active production.

For new designs or component replenishment, the 2114-H-RC is the appropriate selection. This part carries ROHS3 compliance, whereas the original 2114-H is RoHS non-compliant. Both parts maintain REACH Unaffected status and share the same ECCN and HTSUS classifications.

The 2114-H-RC is available in bulk packaging, whereas the original part number may have been supplied in alternative packaging configurations. Verify packaging requirements for your procurement process.

Frequently Asked Questions (FAQ)

Q: Can the 2114-H-RC be used as a direct replacement for the 2114-H?

A: Yes. The 2114-H-RC is electrically and mechanically identical to the 2114-H. All electrical parameters (inductance, current rating, DC resistance, temperature range) and physical dimensions are equivalent. The substitute is suitable for direct board-level replacement.

Q: What is the difference between the 2114-H and 2114-H-RC?

A: The primary differences are product status and RoHS compliance. The 2114-H is obsolete and RoHS non-compliant. The 2114-H-RC is in active production and ROHS3 compliant. Packaging configuration may also differ (bulk versus other formats).

Q: Are there any compatibility concerns when substituting the 2114-H-RC for the 2114-H?

A: No compatibility concerns exist. Both parts are toroidal inductors with identical through-hole radial, horizontal mounting configurations. PCB footprints, lead spacing, and component height are identical.

Q: Does the 2114-H-RC meet current regulatory requirements?

A: Yes. The 2114-H-RC carries ROHS3 compliance and maintains REACH Unaffected status. Both parts share the same ECCN (EAR99) and HTSUS (8504.50.4000) classifications.

Q: What packaging options are available for the 2114-H-RC?

A: The 2114-H-RC is supplied in bulk packaging. Confirm packaging specifications with your supplier if alternative formats are required for your assembly process.