Weidmüller 1715200000 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1715200000 is an 8-position wire-to-board terminal block with 45° mating orientation and 5.08mm pitch, designed for through-hole PCB mounting. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing design support and procurement planning. The part operates at 10A current capacity with 300V voltage rating and accommodates wire gauges from 14-26 AWG using screwless spring cage termination.

Substiute Parts

1715200000

WeidmüllerIn Stock: 9281715200000 Datasheet

Current PartRFQ

1914040000

WeidmüllerIn Stock: 8731914040000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 1715200000 is determined by the following critical parameters:

• Position Count: Must be 8 positions per level
• Mating Orientation: Must be 45° (135°) angle with board
• Mounting Type: Must be through-hole PCB mounting
• Wire Termination Method: Must be screwless spring cage, tension clamp
• Voltage Rating: Must meet or exceed 300V
• Current Rating: Must meet or exceed 10A
• Wire Gauge Compatibility: Must accommodate 14-26 AWG
• Pitch Tolerance: Pitch variation within manufacturing standards for the Omnimate LMZF series

The substitute part 1914040000 meets these criteria with a pitch of 0.197" (5.00mm), which represents a minor dimensional variation within acceptable tolerance for this terminal block category. The substitute maintains all functional and electrical requirements while offering enhanced specifications and active product status.

Parameter Comparison

Engineering Selection Recommendations

The 1914040000 is a direct functional substitute for the 1715200000 based on the following factors:

• Product Status: The substitute is active, ensuring long-term availability and supply chain continuity, whereas the main part is obsolete.
• Electrical Specifications: The substitute exceeds the main part's current rating (15A vs. 10A) while maintaining identical voltage rating (300V) and wire gauge compatibility (14-26 AWG).
• Mechanical Compatibility: Both parts share identical position count, mating orientation, mounting type, and termination method, ensuring PCB layout compatibility.
• Compliance: The substitute is RoHS Compliant and REACH Unaffected, meeting current regulatory requirements.
• Pitch Variation: The 0.08mm pitch difference (5.08mm to 5.00mm) is within standard manufacturing tolerances for the Omnimate LMZF series and does not affect functional performance or PCB footprint compatibility.

Frequently Asked Questions (FAQ)

Q: Can the 1914040000 be used as a direct replacement for the 1715200000 on existing PCBs?

A: Yes. Both parts share identical position count, mating orientation, mounting type, and termination method. The pitch variation of 0.08mm is within acceptable tolerance for this terminal block category and does not require PCB redesign.

Q: What is the significance of the current rating increase from 10A to 15A?

A: The substitute part has a higher current capacity, making it suitable for applications requiring the original 10A rating and for designs with higher current demands. This represents an enhancement rather than a limitation.

Q: Why is product status important in this substitution?

A: The main part is obsolete, meaning Weidmüller has discontinued production and support. The substitute is active, ensuring availability for procurement, technical support, and future design iterations.

Q: Are there packaging differences between these parts?

A: The main part packaging is not specified. The substitute is supplied in bulk packaging. Confirm packaging requirements with your procurement department.

Q: Do both parts meet the same regulatory standards?

A: Both parts are REACH Unaffected. The substitute is additionally RoHS Compliant, meeting current environmental regulations. The main part's RoHS status is not specified.

Q: Is the pitch difference critical for my application?

A: The 0.08mm pitch difference is within standard manufacturing tolerances for the Omnimate LMZF series. PCB footprints designed for the 1715200000 will accommodate the 1914040000 without modification.