PT 2,5/ 4-PVH-5,0 BD:1-4 Equivalent & Substitute Parts

Part Overview

The Phoenix Contact PT 2,5/ 4-PVH-5,0 BD:1-4 is a 4-position terminal block plug with female sockets, 0.197" (5.00mm) pitch, and 180° free-hanging (in-line) configuration. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations. The part operates at 14.6A (IEC) and 250V (IEC), with screw-leaf spring termination and wire gauge compatibility of 12-20 AWG (0.5-4mm²).

Substiute Parts

1701899

Phoenix ContactIn Stock: 10941701899 Datasheet

Current PartRFQ

691385700004

Würth ElektronikIn Stock: 1174691385700004 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Phoenix Contact PT 2,5/ 4-PVH-5,0 BD:1-4 is determined by the following critical parameters:

• Electrical Compatibility: Current rating (IEC minimum 14.6A), voltage rating (IEC minimum 250V), and wire gauge range (minimum 12-20 AWG / 0.5-4mm²)
• Mechanical Compatibility: 4-position configuration, 0.197" (5.00mm) pitch, 180° plug wire entry, and free-hanging (in-line) mounting
• Termination Method: Screw-based termination with leaf spring contact design
• Regulatory Compliance: RoHS compliance status

The Würth Elektronik 691385700004 qualifies as a substitute based on these parameters. It maintains the required 4-position, 5.00mm pitch configuration with 180° wire entry and free-hanging mounting. Electrical ratings exceed the minimum requirements (16A IEC / 250V IEC), and wire gauge compatibility encompasses the original specification range. Screw termination is preserved with defined torque specification (0.5 Nm).

Parameter Comparison

Engineering Selection Recommendations

The Würth Elektronik 691385700004 is the qualified substitute for the obsolete Phoenix Contact PT 2,5/ 4-PVH-5,0 BD:1-4. Selection is based on the following engineering criteria:

Electrical Compliance: The substitute meets or exceeds all electrical requirements. IEC current rating of 16A exceeds the original 14.6A specification. IEC voltage rating of 250V matches the original. Wire gauge range of 12-24 AWG (0.2-2.5mm²) encompasses the original 12-20 AWG (0.5-4mm²) specification.

Mechanical Compatibility: Both parts maintain identical 4-position, 5.00mm pitch configuration with 180° wire entry and free-hanging mounting, ensuring direct mechanical interchangeability.

Regulatory Status: The substitute carries active product status with ROHS3 compliance, providing long-term supply assurance and regulatory alignment. The original part's RoHS compliance is maintained and enhanced.

Termination Method: Screw-based termination is preserved in the substitute, maintaining the connection methodology of the original design.

Frequently Asked Questions (FAQ)

Q: Can the Würth Elektronik 691385700004 directly replace the Phoenix Contact PT 2,5/ 4-PVH-5,0 BD:1-4?

A: Yes. Both parts share identical mechanical configuration (4-position, 5.00mm pitch, 180° wire entry, free-hanging mounting) and termination method (screw-based). Electrical ratings of the substitute meet or exceed the original specification.

Q: What are the key compatibility criteria for this terminal block family?

A: Substitution is determined by: 4-position configuration, 0.197" (5.00mm) pitch, 180° plug wire entry, free-hanging mounting, screw termination, and electrical ratings of minimum 14.6A (IEC) and 250V (IEC).

Q: Does the wire gauge range difference affect compatibility?

A: The substitute wire gauge range (12-24 AWG / 0.2-2.5mm²) encompasses the original specification (12-20 AWG / 0.5-4mm²). The substitute accommodates the original wire gauge requirements and extends compatibility to additional gauges.

Q: What is the packaging difference between these parts?

A: The Phoenix Contact part number 1701899 does not specify packaging format. The Würth Elektronik 691385700004 is supplied in Tray packaging.

Q: Are there compliance differences between the two parts?

A: Both parts are RoHS compliant. The substitute carries ROHS3 compliance, representing current regulatory alignment. The original part is classified as obsolete, while the substitute maintains active product status.