Weidmüller 1623200000 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1623200000 is a 6-position terminal block plug with female sockets, 0.300" (7.62mm) pitch, designed for 180° free-hanging in-line applications. This component belongs to the Omnimate BL series and features screw-clamping termination with retention latches. The part is currently obsolete, making equivalent substitutes necessary for ongoing system maintenance and new designs requiring compatible connectivity solutions.

Substiute Parts

1623200000

WeidmüllerIn Stock: 8541623200000 Datasheet

Current PartRFQ

796981-6

TE Connectivity AMP ConnectorsIn Stock: 1234796981-6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Weidmüller 1623200000 is determined by the following critical parameters:

• Connector Type & Configuration: 6-position plug with female sockets
• Pitch Specification: 0.300" (7.62mm) center-to-center spacing
• Wire Entry Orientation: 180° free-hanging in-line configuration
• Electrical Ratings: Minimum 15 A current capacity and 300 V voltage rating (UL standard)
• Termination Method: Screw-based clamping mechanism
• Wire Gauge Compatibility: Support for 12-26 AWG conductor sizes
• Mounting Configuration: Free-hanging in-line mounting without additional hardware
• Retention Features: Latches on non-wire side for mechanical stability

The TE Connectivity AMP Connectors 796981-6 meets these substitution criteria through equivalent electrical performance, compatible pitch and position configuration, and functional wire entry orientation.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 796981-6 is a direct functional substitute for the obsolete Weidmüller 1623200000. Both components share identical electrical ratings (15 A / 300 V UL), pitch specification (7.62mm), position count (6), and mounting configuration (180° free-hanging in-line).

Key advantages of the TE Connectivity substitute:

• Active Product Status: Currently manufactured and stocked, ensuring long-term availability and supply chain continuity
• Extended Temperature Range: Operating range of -40°C ~ 110°C exceeds the original specification of -20°C ~ 100°C
• Expanded Wire Gauge Support: Accepts 12-30 AWG versus the original 12-26 AWG, providing greater conductor flexibility
• Enhanced Compliance: ROHS3 certification meets current regulatory requirements
• Equivalent Certifications: UL94 V-0 flammability rating and EAR99 export classification match the original component

Both components feature tin-plated copper alloy contacts, UL94 V-0 rated housing materials, and retention latches for mechanical stability. The screw-based termination method differs in clamping mechanism (rising cage clamp versus clamping yoke), but both provide equivalent electrical and mechanical performance for the specified application parameters.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 796981-6 directly replace the Weidmüller 1623200000 in existing installations?

A: Yes. Both components share identical pitch (7.62mm), position count (6), wire entry orientation (180°), electrical ratings (15 A / 300 V UL), and mounting configuration (free-hanging in-line). The connector interface and mating characteristics are compatible.

Q: What are the differences in termination method between these two parts?

A: The Weidmüller 1623200000 uses a screw-clamping yoke (tension sleeve) termination, while the TE Connectivity 796981-6 employs a rising cage clamp mechanism. Both methods provide equivalent screw-based wire clamping and are suitable for 12-26 AWG conductors (TE Connectivity supports up to 30 AWG).

Q: Are there wire gauge compatibility considerations?

A: The Weidmüller part supports 12-26 AWG (2.5mm²), while the TE Connectivity substitute supports 12-30 AWG (0.05-3mm²). The TE Connectivity part accommodates a broader range, making it suitable for applications using the original wire gauge specification and smaller conductors.

Q: What is the impact of the different screw sizes (M2.5 versus M3)?

A: The screw size difference reflects the different clamping mechanisms. The Weidmüller uses M2.5 screws with 0.4-0.5 Nm torque specification, while the TE Connectivity uses M3 screws with 0.79 Nm torque. Each component must be terminated according to its manufacturer's torque specification. This difference does not affect connector compatibility or mating performance.

Q: Does the extended operating temperature range of the TE Connectivity part affect compatibility?

A: No. The TE Connectivity 796981-6 operating range of -40°C ~ 110°C encompasses the original Weidmüller specification of -20°C ~ 100°C. The substitute is suitable for all applications within the original temperature envelope and extends capability to more extreme conditions.

Q: Are both parts RoHS compliant?

A: Yes. The Weidmüller 1623200000 is RoHS Compliant, and the TE Connectivity 796981-6 is ROHS3 Compliant. Both meet current environmental and hazardous substance restrictions.

Q: What is the packaging difference between these parts?

A: The Weidmüller part is supplied in standard packaging (not specified), while the TE Connectivity substitute is supplied in bulk packaging. Verify packaging requirements for your procurement and assembly processes.