160335J100O-F Film Capacitor: Equivalent & Substitute Parts

Part Overview

The 160335J100O-F is a 3.3 µF film capacitor manufactured by Cornell Dubilier Electronics (CDE) in the 160 series. This radial through-hole component operates at 100V DC with polyester metallized dielectric construction. The part is Active in product status with 880 units currently in stock. Film capacitors of this specification are used in general-purpose applications requiring stable capacitance and low ESR characteristics across the operating temperature range of -55°C to 105°C. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable.

Substiute Parts

160335J100O-F

Cornell Dubilier Electronics (CDE)In Stock: 947160335J100O-F Datasheet

Current PartRFQ

B32523Q3335J000

EPCOS - TDK ElectronicsIn Stock: 9280B32523Q3335J000 Datasheet

UpgradeRFQ

B32522C1335J000

EPCOS - TDK ElectronicsIn Stock: 2775B32522C1335J000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the 160335J100O-F is based on the following allowed electrical and mechanical parameters:

Electrical Compatibility Criteria:

• Capacitance value must be 3.3 µF (exact match)
• Tolerance must be ±5% or tighter
• DC voltage rating must be 100V or higher
• AC voltage rating must be 63V or higher
• Dielectric material must be polyester-based (metallized film)
• Operating temperature range must encompass -55°C to 105°C or extend beyond

Mechanical Compatibility Criteria:

• Mounting type must be through-hole radial
• Lead spacing must be 0.886" (22.50mm) for direct PCB footprint compatibility
• Package case must be radial configuration
• Termination must be PC pins

Regulatory Compliance:

• RoHS3 compliance required
• REACH unaffected status maintained

Two substitute parts are identified:

1. B32523Q3335J000 (Upgrade Substitute): Exceeds voltage rating (250V DC / 160V AC), extends operating temperature to 125°C, maintains identical lead spacing and radial configuration. Suitable for applications requiring higher voltage margin or extended temperature performance.

2. B32522C1335J000 (Direct Equivalent): Matches voltage rating (100V DC / 63V AC), extends operating temperature to 125°C, maintains radial configuration with identical lead spacing. Smaller physical footprint due to stacked construction. Suitable for space-constrained designs with identical electrical requirements.

Parameter Comparison

Engineering Selection Recommendations

B32523Q3335J000 Selection Criteria:

This EPCOS upgrade substitute is suitable when:

• Higher DC voltage margin is required (250V vs. 100V)
• Extended operating temperature to 125°C is beneficial
• PCB footprint accommodates the identical 0.886" (22.50mm) lead spacing
• Slightly larger physical dimensions (0.807" height vs. 0.748") are acceptable
• AEC-Q200 automotive qualification is required
• Design benefits from increased voltage headroom for reliability

B32522C1335J000 Selection Criteria:

This EPCOS direct equivalent is suitable when:

• Electrical specifications match exactly (100V DC, 63V AC)
• Space constraints require compact form factor (0.571" height vs. 0.748")
• PCB redesign is acceptable to accommodate 0.591" (15.00mm) lead spacing
• Stacked radial construction meets application requirements
• AEC-Q200 automotive qualification is required
• Extended operating temperature to 125°C is beneficial

Regulatory Compliance:

All three parts maintain ROHS3 compliance and REACH unaffected status, satisfying current regulatory requirements for electronic component procurement.

Frequently Asked Questions (FAQ)

Q: Can B32523Q3335J000 be used as a direct drop-in replacement for 160335J100O-F?

A: B32523Q3335J000 maintains identical lead spacing (0.886" / 22.50mm) and radial through-hole mounting, allowing direct PCB footprint compatibility. However, the increased height (0.807" vs. 0.748") must be verified against clearance constraints. The higher voltage rating (250V DC vs. 100V DC) does not create compatibility issues and provides additional voltage margin.

Q: Why does B32522C1335J000 have different lead spacing?

A: B32522C1335J000 uses stacked radial construction, resulting in a more compact form factor with 0.591" (15.00mm) lead spacing versus the standard 0.886" (22.50mm). This part requires PCB footprint modification and cannot be used as a direct drop-in replacement without circuit board redesign.

Q: Are all three parts suitable for automotive applications?

A: The 160335J100O-F is specified for general-purpose applications. Both EPCOS substitutes (B32523Q3335J000 and B32522C1335J000) carry AEC-Q200 automotive qualification. If automotive compliance is required, the EPCOS parts are the appropriate selection.

Q: What is the temperature performance difference?

A: The 160335J100O-F operates from -55°C to 105°C. Both EPCOS substitutes extend the upper limit to 125°C, providing 20°C additional high-temperature margin. Both maintain the -55°C lower limit.

Q: Can I use B32523Q3335J000 in place of B32522C1335J000?

A: Yes, B32523Q3335J000 can replace B32522C1335J000 electrically and mechanically. B32523Q3335J000 has higher voltage rating (250V vs. 100V) and identical lead spacing (0.886" vs. 0.591"), but larger physical dimensions. Verify PCB clearance before substitution.

Q: What is the significance of the ±5% tolerance specification?

A: The ±5% tolerance indicates capacitance accuracy. All three parts maintain this tolerance, ensuring consistent circuit performance. Tighter tolerances are not available in these substitute options.

Q: Are there inventory considerations for these substitutes?

A: The 160335J100O-F has 880 units in stock. B32523Q3335J000 has 9,266 units available, and B32522C1335J000 has 2,678 units available, providing multiple sourcing options for procurement continuity.