Equivalent & Substitute Parts for 130910-I-B1

Part Overview

The 130910-I-B1 is a Keystone Connector manufactured by METZ CONNECT USA Inc., specifically an RJ45 CAT 6A E-DAT Module Jack with IDC/Pressdown/Punchdown block termination. This insert modular jack features 8-position 8-conductor (8p8c) Ethernet connectivity with shielded construction and gold-plated copper alloy contacts.

The 130910-I-B1 carries an Obsolete product status. Locating equivalent substitute parts is necessary to maintain system compatibility, ensure continued availability for new installations, and support existing deployments requiring component replacement or expansion.

Substiute Parts

130910-I-B1

METZ CONNECT USA Inc.In Stock: 897130910-I-B1 Datasheet

Current PartRFQ

130910-I

METZ CONNECT USA Inc.In Stock: 800130910-I Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 130910-I-B1 is determined by strict equivalence across the following critical parameters:

Connector Interface Requirements:

• Modular Jack 8p8c (RJ45, Ethernet) exterior type
• IDC, Pressdown, Punchdown Block interior termination type

Electrical & Performance Requirements:

• Cat6a category rating
• Shielded construction
• Gold-plated copper alloy contacts
• Operating temperature range: -40°C to 70°C

Compliance & Environmental Requirements:

• ROHS3 Compliant
• REACH Unaffected
• MSL 1 (Unlimited moisture sensitivity level)

Packaging:

• Bulk packaging format

The substitute part 130910-I meets all these criteria and is therefore a direct functional equivalent.

Parameter Comparison

Engineering Selection Recommendations

The 130910-I is the manufacturer-recommended substitute for the obsolete 130910-I-B1. Both parts are manufactured by METZ CONNECT USA Inc. and share identical electrical, mechanical, and compliance specifications.

Selection Basis:

The 130910-I maintains full functional equivalence with the 130910-I-B1 across all critical parameters: connector interface (RJ45 8p8c), termination method (IDC/Pressdown/Punchdown), category rating (Cat6a), shielding, contact materials and finishes, operating temperature range, and environmental compliance certifications (ROHS3, REACH Unaffected, MSL 1).

The primary distinction is product status: the 130910-I-B1 is Obsolete, while the 130910-I carries Active status. This status difference reflects manufacturing lifecycle positioning and supply chain availability. The 130910-I is currently in production and maintains active inventory (712 Pcs New Original In Stock), ensuring reliable procurement for new designs and replacement applications.

For applications currently using the 130910-I-B1, direct substitution with the 130910-I is supported without modification to connector interfaces, termination procedures, or system performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can the 130910-I directly replace the 130910-I-B1 in existing installations?

A: Yes. The 130910-I is a direct functional equivalent. Both parts feature identical RJ45 8p8c modular jack interfaces, IDC/Pressdown/Punchdown block termination, Cat6a rating, shielded construction, and gold-plated copper alloy contacts. No modifications to wiring, termination procedures, or system configuration are required.

Q: What is the difference between the 130910-I-B1 and 130910-I?

A: The parts are electrically and mechanically identical. The primary difference is product lifecycle status: 130910-I-B1 is Obsolete, while 130910-I is Active. The 130910-I is currently manufactured and maintains active inventory support.

Q: Are both parts ROHS3 compliant and REACH compliant?

A: Yes. Both the 130910-I-B1 and 130910-I are ROHS3 Compliant and REACH Unaffected. Both carry MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -40°C to 70°C, supporting standard commercial and industrial networking environments.

Q: What termination method do these connectors use?

A: Both parts use IDC (Insulation Displacement Contact), Pressdown, and Punchdown block termination methods, compatible with standard Keystone connector termination tools and procedures.

Q: Are these connectors shielded?

A: Yes. Both the 130910-I-B1 and 130910-I feature shielded construction, providing electromagnetic interference (EMI) protection for Cat6a Ethernet applications.