TE Connectivity Erni 114809 Equivalent & Substitute Parts

Part Overview

The TE Connectivity Erni 114809 is a 110 Position Receptacle connector with female sockets, featuring a 0.079" (2.00mm) pitch and board edge, through-hole, right-angle mounting configuration. This component belongs to the ERMET series backplane connector family and utilizes press-fit termination technology with gold-plated contacts.

The 114809 is classified as obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production and field service requirements for systems utilizing this connector architecture.

Substiute Parts

114809

TE Connectivity ErniIn Stock: 1368114809 Datasheet

Current PartRFQ

5646489-1

TE Connectivity AMP ConnectorsIn Stock: 16485646489-1 Datasheet

MFR RecommendedRFQ

646489-1

TE Connectivity AMP ConnectorsIn Stock: 1185646489-1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 114809 are identified based on strict electrical and mechanical parameter alignment. The following parameters establish substitution eligibility:

Critical Matching Parameters:

• Connector Type: Receptacle, Female Sockets
• Number of Positions: 110
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5
• Connector Style: AB 22
• Mounting Type: Board Edge, Through Hole, Right Angle
• Termination: Press-Fit
• Contact Finish: Gold
• Operating Temperature Range: -55°C ~ 125°C
• Positions Loaded: All

All identified substitute parts match these parameters without exception. Substitutes are further differentiated by product status, regulatory compliance, and additional electrical specifications where provided.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TE Connectivity AMP Connectors 5646489-1

The 5646489-1 is designated as the manufacturer-recommended substitute for the obsolete 114809. This part maintains complete electrical and mechanical compatibility across all critical parameters. The 5646489-1 carries active product status, ensuring long-term availability and supply chain support. This part is RoHS Compliant and carries REACH Unaffected status, meeting current regulatory requirements for new designs and production environments.

Secondary Substitute: TE Connectivity AMP Connectors 646489-1

The 646489-1 provides functional equivalence with identical electrical and mechanical specifications. However, this part is classified as RoHS non-compliant and REACH Affected. Selection of this part is appropriate only for legacy system maintenance, field service replacement, or applications where regulatory compliance requirements do not apply. The 646489-1 remains in active production status with adequate inventory availability.

Compliance Considerations:

For new designs and production environments subject to RoHS and REACH regulations, the 5646489-1 is the appropriate selection. For existing systems currently utilizing the 114809, either substitute part provides functional compatibility. The choice between 5646489-1 and 646489-1 depends on the regulatory environment and compliance requirements of the application.

Frequently Asked Questions (FAQ)

Q: Can the 5646489-1 directly replace the obsolete 114809 in existing designs?

A: Yes. The 5646489-1 matches all critical electrical and mechanical parameters of the 114809, including connector type, position count, pitch, row configuration, mounting style, termination method, contact finish, and operating temperature range. Direct substitution is supported without design modification.

Q: What is the difference between the 5646489-1 and 646489-1?

A: Both parts are functionally identical in electrical and mechanical specifications. The primary differences are regulatory compliance status: the 5646489-1 is RoHS Compliant with REACH Unaffected status, while the 646489-1 is RoHS non-compliant and REACH Affected. The 5646489-1 is the preferred choice for applications requiring current regulatory compliance.

Q: Why is the 114809 classified as obsolete?

A: The 114809 is an older ERMET series connector. TE Connectivity has transitioned this product line to the Z-PACK series, represented by the 5646489-1 and 646489-1 variants, which offer improved regulatory compliance and active production support.

Q: Are there packaging differences between these parts?

A: The 114809 packaging is not specified. The 5646489-1 is supplied in Tube packaging. The 646489-1 packaging is not specified. Packaging differences do not affect functional compatibility; they relate only to handling, storage, and logistics.

Q: What electrical specifications should I verify for my application?

A: The substitute parts provide Current Rating of 1.5 A and Voltage Rating of 500Vrms. Verify these specifications against your application requirements. The original 114809 does not specify these electrical parameters; if your design relies on specific electrical performance, confirm compatibility with the substitute part ratings.

Q: Can I use the 646489-1 in a new design?

A: The 646489-1 is functionally compatible but carries RoHS non-compliant and REACH Affected status. Use of this part in new designs is not recommended if your application or market requires RoHS or REACH compliance. The 5646489-1 is the appropriate choice for new designs.

Q: Are all 110 positions loaded in the substitute parts?

A: Yes. Both substitute parts have all 110 positions loaded, matching the configuration of the original 114809.

Q: What is the moisture sensitivity level for these connectors?

A: All three parts carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or use.