Amphenol RF 112467 BNC Connector Plug Equivalent & Substitute Parts

Part Overview

The Amphenol RF 112467 is an active BNC connector plug designed for coaxial RF applications. This right-angle, male pin connector operates at 50 ohms impedance with solder contact termination and crimp shield termination. The connector accommodates standard coaxial cables including RG-58 series and LMR-195, supporting frequencies up to 4 GHz with a maximum voltage rating of 500 V.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector specification, allowing for direct functional replacement in circuit designs and cable assemblies.

Substiute Parts

112467

Amphenol RFIn Stock: 941112467 Datasheet

Current PartRFQ

112162

Amphenol RFIn Stock: 1594112162 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Amphenol RF 112467 is determined by strict equivalence across the following critical parameters:

Electrical Parameters: Impedance (50 Ohms), frequency maximum rating (4 GHz), voltage rating (500 V), and insertion loss (0.2 dB) must remain constant.

Mechanical Parameters: Connector style (BNC), connector type (Plug, Male Pin), mounting configuration (Free Hanging, Right Angle), and fastening mechanism (Bayonet Lock) must be identical.

Termination Parameters: Contact termination method (Solder) and shield termination method (Crimp) must match exactly.

Cable Compatibility: The substitute must support the same cable group specifications: RG-58, 58A, 58B, 58C, 141, 303, LMR-195, Belden B7806A, and 9907.

Compliance Parameters: RoHS3 compliance and REACH affected status must be maintained.

The Amphenol RF 112162 meets all substitution criteria and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol RF 112467 and Amphenol RF 112162 are active products with identical electrical and mechanical specifications. Selection between these parts is based on the following factors:

Dielectric Material Consideration: The 112467 uses Polytetrafluoroethylene (PTFE) dielectric material, while the 112162 uses Polyoxymethylene (POM) Acetal. Both materials are suitable for RF applications at 4 GHz and below. PTFE offers superior high-frequency performance and lower dielectric loss, while POM Acetal provides cost efficiency. The choice depends on application-specific performance requirements.

Packaging and Inventory: The 112467 is supplied in unspecified packaging with 855 units in stock. The 112162 is supplied in bag packaging with 1540 units in stock. Packaging selection should align with assembly process requirements and supply chain logistics.

Compliance Status: Both parts maintain ROHS3 compliance and REACH affected status, ensuring regulatory compatibility across global markets.

Product Status: Both parts are active products from Amphenol RF, ensuring continued availability and manufacturer support.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol RF 112162 directly replace the Amphenol RF 112467 in existing designs?

A: Yes. Both connectors maintain identical electrical parameters (50 ohms impedance, 4 GHz maximum frequency, 500 V voltage rating), mechanical configuration (BNC plug, male pin, right angle, free hanging), and termination methods (solder contact, crimp shield). The connectors are functionally equivalent for RF applications.

Q: What is the difference between the dielectric materials used in these connectors?

A: The 112467 uses PTFE (Polytetrafluoroethylene) dielectric material, while the 112162 uses POM Acetal (Polyoxymethylene) dielectric material. Both materials support the specified 4 GHz frequency range and 500 V voltage rating. PTFE provides lower dielectric loss characteristics, while POM Acetal offers alternative material properties. Selection depends on specific application performance criteria.

Q: Are both connectors compatible with the same cable types?

A: Yes. Both the 112467 and 112162 support identical cable group compatibility: RG-58, 58A, 58B, 58C, 141, 303, LMR-195, Belden B7806A, and 9907. Cable selection is independent of which connector variant is used.

Q: What is the difference in packaging between these two parts?

A: The 112467 is supplied in unspecified packaging, while the 112162 is supplied in bag packaging. Packaging selection should align with assembly process requirements, handling procedures, and inventory management systems.

Q: Do both connectors meet the same regulatory compliance standards?

A: Yes. Both the 112467 and 112162 are ROHS3 compliant and REACH affected. They maintain identical compliance status for global market deployment.

Q: What is the insertion loss specification for both connectors?

A: Both connectors specify 0.2 dB insertion loss at the operating frequency range up to 4 GHz. This parameter is identical across both part numbers.

Q: Are both connectors rated for the same number of mating cycles?

A: Yes. Both the 112467 and 112162 are rated for 500 mating cycles, indicating equivalent mechanical durability and connector longevity.