107SML063M Equivalent & Substitute Parts

Part Overview

The 107SML063M is a 100 µF, 63 V aluminum electrolytic capacitor manufactured by Cornell Dubilier / Illinois Capacitor in the SML series. This surface mount radial can capacitor is designed for general purpose applications with a rated lifetime of 2000 hours at 85°C and an operating temperature range of -40°C to 85°C. The part is currently active in production with 1380 pieces in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements demand enhanced performance characteristics such as extended temperature ratings or improved electrical properties, or when alternative manufacturers' components meet the same functional specifications within acceptable tolerance ranges.

Key Parameters

Parameter	Value	Unit
Capacitance	100	µF
Voltage - Rated	63	V
Tolerance	±20%	-
Operating Temperature Range	-40°C ~ 85°C	-
Lifetime @ Temperature	2000 Hrs @ 85°C	-
ESR @ 120Hz	1.99	Ohm
Ripple Current @ 120 Hz	280	mA
Ripple Current @ 100 kHz	420	mA
Size / Dimension	0.394" Dia (10.00mm)	-
Height - Seated (Max)	0.417" (10.60mm)	-
Surface Mount Land Size	0.394" L x 0.394" W (10.00mm x 10.00mm)	-
Mounting Type	Surface Mount	-
Package / Case	Radial, Can - SMD	-
RoHS Status	ROHS3 Compliant	-
Moisture Sensitivity Level	1 (Unlimited)	-

Substitute Part Grouping Explanation

Substitution of aluminum electrolytic capacitors is determined by strict equivalence in the following parameters:

Critical Parameters (Must Match Exactly):

Capacitance: 100 µF
Voltage Rating: 63 V
Tolerance: ±20%
Polarization: Polar
Mounting Type: Surface Mount
Package / Case: Radial, Can - SMD
Physical Dimensions: 0.394" Dia (10.00mm) with compatible height and land size

Performance Parameters (Must Meet or Exceed):

Lifetime @ Temperature: Minimum 2000 Hrs @ 85°C
Operating Temperature Range: Minimum -40°C ~ 85°C
Ripple Current Ratings: Must support application requirements
ESR: Lower values indicate improved performance

Compliance Parameters:

RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)
REACH Status: REACH Unaffected

Substitute parts are categorized as direct equivalents when all critical parameters match and performance parameters meet or exceed the main part. Upgrade parts are classified when they provide enhanced performance characteristics such as extended temperature ratings (105°C vs. 85°C) or improved electrical properties while maintaining physical and electrical compatibility.

Parameter Comparison

Part Number	Manufacturer	Series	Capacitance (µF)	Voltage (V)	Tolerance	Lifetime @ Temp	Operating Temp Range	ESR @ 120Hz (Ohm)	Ripple Current @ 120Hz (mA)	Ripple Current @ 100kHz (mA)	Height (mm)	Product Status	Ratings
107SML063M	Cornell Dubilier / Illinois Capacitor	SML	100	63	±20%	2000 Hrs @ 85°C	-40°C ~ 85°C	1.99	280	420	10.60	Active	-
63SEV100M10X10.5	Rubycon	SEV	100	63	±20%	2000 Hrs @ 85°C	-40°C ~ 85°C	-	240	288	10.50	Active	AEC-Q200
AVE107M63G24T-F	Cornell Dubilier Electronics (CDE)	AVE	100	63	±20%	2000 Hrs @ 85°C	-40°C ~ 85°C	1.66	226	339	10.50	Obsolete	-
AVS107M63G24T-F	Cornell Dubilier Electronics (CDE)	AVS	100	63	±20%	2000 Hrs @ 85°C	-40°C ~ 85°C	3.00	60	102	10.20	Not For New Designs	AEC-Q200
EDK107M063A9PAA	KEMET	EDK	100	63	±20%	2000 Hrs @ 85°C	-40°C ~ 85°C	-	60	75	10.50	Active	-
EEE-1JA101P	Panasonic Electronic Components	S	100	63	±20%	2000 Hrs @ 85°C	-40°C ~ 85°C	-	60	102	10.20	Not For New Designs	AEC-Q200
63SGV100M10X10.5	Rubycon	SGV	100	63	±20%	2000 Hrs @ 105°C	-40°C ~ 105°C	-	-	-	10.50	Active	AEC-Q200
AFK107M63G24T-F	Cornell Dubilier Electronics (CDE)	AFK	100	63	±20%	2000 Hrs @ 105°C	-55°C ~ 105°C	0.350	300	400	10.50	Active	AEC-Q200
EDH107M063A9PAA	KEMET	EDH	100	63	±20%	2000 Hrs @ 105°C	-40°C ~ 105°C	-	340	425	10.50	Active	-
EEE-FK1J101P	Panasonic Electronic Components	FK	100	63	±20%	2000 Hrs @ 105°C	-55°C ~ 105°C	0.350	300	400	10.50	Active	AEC-Q200
EEV107M063A9PAA	KEMET	EEV	100	63	±20%	2000 Hrs @ 105°C	-55°C ~ 105°C	-	280	400	10.50	Active	-

Engineering Selection Recommendations

Direct Equivalent Parts (85°C Lifetime Rating):

The following parts provide direct functional equivalence to the 107SML063M with matching 2000 hour lifetime at 85°C:

63SEV100M10X10.5 (Rubycon SEV series): Active product with AEC-Q200 automotive qualification. Physical dimensions and electrical specifications are compatible. Ripple current ratings are lower than the main part.
EDK107M063A9PAA (KEMET EDK series): Active product with general purpose application rating. Compatible physical dimensions. Ripple current ratings are significantly lower than the main part.
EEE-1JA101P (Panasonic EEE-1JA series): Marked as Not For New Designs but remains in stock. AEC-Q200 automotive qualified. Ripple current ratings are lower than the main part.

Upgrade Parts (105°C Lifetime Rating):

The following parts provide enhanced performance with extended temperature rating to 105°C and 2000 hour lifetime at that elevated temperature:

63SGV100M10X10.5 (Rubycon SGV series): Active product with AEC-Q200 automotive qualification. Extended operating temperature range to 105°C. Recommended for applications requiring improved thermal performance.
AFK107M63G24T-F (Cornell Dubilier AFK series): Active product with AEC-Q200 automotive qualification. Extended operating temperature range to -55°C ~ 105°C. Improved ESR of 0.350 Ohm @ 100kHz and higher ripple current ratings (300 mA @ 120Hz, 400 mA @ 100kHz). Packaging is Cut Tape & Digi-Reel rather than standard Tape & Reel.
EDH107M063A9PAA (KEMET EDH series): Active product with general purpose application rating. Extended operating temperature range to 105°C. Higher ripple current ratings (340 mA @ 120Hz, 425 mA @ 10kHz).
EEE-FK1J101P (Panasonic EEE-FK series): Active product with AEC-Q200 automotive qualification. Extended operating temperature range to -55°C ~ 105°C. Improved ESR of 0.350 Ohm and higher ripple current ratings (300 mA @ 120Hz, 400 mA @ 100kHz). Packaging is Cut Tape & Digi-Reel rather than standard Tape & Reel.
EEV107M063A9PAA (KEMET EEV series): Active product with general purpose application rating. Extended operating temperature range to -55°C ~ 105°C. Ripple current ratings match the main part (280 mA @ 120Hz, 400 mA @ 100kHz).

Parts Not Recommended for New Designs:

AVE107M63G24T-F (Cornell Dubilier AVE series): Marked as Obsolete. Not suitable for new design implementations.
AVS107M63G24T-F (Cornell Dubilier AVS series): Marked as Not For New Designs. Significantly lower ripple current ratings (60 mA @ 120Hz, 102 mA @ 10kHz) limit application suitability.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a higher temperature rating in place of the 107SML063M?

A: Yes. Parts with extended temperature ratings (105°C vs. 85°C) are fully compatible and provide enhanced performance. The 107SML063M operates within -40°C to 85°C; substitute parts rated to 105°C will function correctly in this range and provide additional thermal margin for applications approaching the upper temperature limit.

Q: What is the significance of the ESR (Equivalent Series Resistance) value?

A: ESR directly affects capacitor performance in ripple current applications and high-frequency circuits. Lower ESR values indicate reduced power dissipation and improved performance. The 107SML063M has an ESR of 1.99 Ohm @ 120Hz. Upgrade parts such as AFK107M63G24T-F and EEE-FK1J101P offer significantly lower ESR of 0.350 Ohm @ 100kHz, resulting in improved efficiency and reduced heat generation.

Q: Are there differences in ripple current handling between substitute parts?

A: Yes. Ripple current ratings vary significantly among substitute parts. The 107SML063M supports 280 mA @ 120Hz and 420 mA @ 100kHz. Some direct equivalents such as EDK107M063A9PAA support only 60 mA @ 120Hz and 75 mA @ 10kHz. Upgrade parts such as EDH107M063A9PAA support 340 mA @ 120Hz and 425 mA @ 10kHz. Selection must match application ripple current requirements.

Q: What is the difference between Tape & Reel (TR) and Cut Tape & Digi-Reel packaging?

A: Both are surface mount packaging formats suitable for automated assembly. Tape & Reel (TR) is standard continuous reel packaging. Cut Tape & Digi-Reel is pre-cut tape on a reel, offering flexibility for smaller production runs. Both formats are compatible with standard pick-and-place equipment. Verify your assembly equipment compatibility before selecting packaging format.

Q: Why are some substitute parts marked as "Not For New Designs"?

A: Parts marked as Not For New Designs are typically older product lines that manufacturers are phasing out. While they remain functionally equivalent and available in inventory, manufacturers recommend using active product lines for new designs to ensure long-term availability and support. Examples include AVE107M63G24T-F (Obsolete) and EEE-1JA101P (Not For New Designs).

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive electronics qualification standard. Parts bearing this rating have been tested and approved for automotive applications, indicating compliance with automotive industry reliability and performance standards. Several substitute parts carry this qualification, making them suitable for automotive applications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 Compliant and REACH Unaffected, matching the compliance status of the 107SML063M. This ensures environmental and regulatory compatibility across all listed alternatives.

Q: Can I substitute a part with lower ripple current rating if my application does not require high ripple current?

A: Yes, provided the ripple current rating meets or exceeds your application's actual requirement. However, using a part with higher ripple current capability provides design margin and improved reliability. Verify your application's ripple current specification before selecting a substitute with lower ratings.

Q: What physical dimension differences exist between substitute parts?

A: All substitute parts maintain the same 0.394" diameter (10.00mm). Height varies slightly: the main part is 0.417" (10.60mm), while most substitutes are 0.413" (10.50mm) or 0.402" (10.20mm). Surface mount land sizes also vary slightly (10.00mm to 10.40mm). Verify PCB layout compatibility before final part selection, particularly for tightly spaced designs.

Q: Which substitute part offers the best overall performance upgrade?

A: AFK107M63G24T-F and EEE-FK1J101P both offer the most comprehensive performance improvements: extended temperature range (-55°C ~ 105°C), significantly reduced ESR (0.350 Ohm @ 100kHz), and higher ripple current ratings (300 mA @ 120Hz, 400 mA @ 100kHz). Both carry AEC-Q200 automotive qualification. Selection between these two depends on manufacturer preference and inventory availability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message