107BPS050M Equivalent & Substitute Parts

Part Overview

The 107BPS050M is a 100 µF, 50 V aluminum electrolytic capacitor in radial, can package manufactured by Cornell Dubilier / Illinois Capacitor. This component is classified as Active product status and is designed for audio applications. The capacitor features bi-polar polarization, a rated lifetime of 2000 hours at 85°C, and operates across a temperature range of -40°C to 85°C.

Substitute parts become necessary when the primary component experiences extended lead times, inventory constraints, or when design flexibility permits selection from qualified alternatives that meet identical electrical and mechanical specifications.

Substiute Parts

107BPS050M

Cornell Dubilier / Illinois CapacitorIn Stock: 1081107BPS050M Datasheet

Current PartRFQ

UVP1H101MPD

NichiconIn Stock: 2027UVP1H101MPD Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 107BPS050M is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance: 100 µF (exact match)
• Voltage Rating: 50 V (exact match)
• Tolerance: ±20% (exact match)
• Lifetime: 2000 Hrs @ 85°C (exact match)
• Operating Temperature Range: -40°C to 85°C (exact match)
• Ripple Current Capability: 265 mA @ 120 Hz minimum (exact match)
• Polarization: Bi-Polar (exact match)

Mechanical Equivalence Requirements:

• Lead Spacing: 0.197" (5.00 mm) (exact match)
• Diameter: 0.394" (10.00 mm) (exact match)
• Height: 0.866" (22.00 mm) maximum (exact match)
• Mounting Type: Through Hole (exact match)
• Package: Radial, Can (exact match)

Compliance Requirements:

• RoHS3 Compliant (mandatory)

The substitute part UVP1H101MPD meets all electrical and mechanical parameters specified above. However, product status differences and REACH compliance variations exist and are documented in the parameter comparison table.

Parameter Comparison

Engineering Selection Recommendations

For Active Product Designs: The 107BPS050M is the primary selection for new designs. This component carries Active product status, indicating ongoing manufacturer support, continued availability, and full design lifecycle support.

For Existing Designs or Inventory Constraints: The UVP1H101MPD serves as a functional equivalent when the 107BPS050M is unavailable. This substitute meets all critical electrical and mechanical parameters required for direct board-level replacement. Both components are ROHS3 compliant and suitable for through-hole PCB assembly.

Compliance Considerations: The 107BPS050M carries REACH Unaffected status, while the UVP1H101MPD is REACH Affected. Applications subject to REACH regulatory requirements should verify compliance obligations with the substitute part before implementation.

Product Status Impact: The UVP1H101MPD is designated "Not For New Designs." This designation indicates the manufacturer does not recommend this part for new product development. Use of this substitute is appropriate for maintenance, repair, or replacement scenarios in existing systems where the 107BPS050M is unavailable.

Frequently Asked Questions (FAQ)

Q: Can the UVP1H101MPD be used as a direct replacement for the 107BPS050M on the same PCB?

A: Yes. Both components share identical mechanical dimensions (0.394" diameter, 0.866" maximum height, 0.197" lead spacing), identical mounting type (through hole), and identical package configuration (radial, can). No PCB layout modifications are required.

Q: Are the electrical specifications identical between these two parts?

A: The critical electrical specifications are equivalent: both provide 100 µF capacitance at 50 V with ±20% tolerance, 2000-hour lifetime at 85°C, -40°C to 85°C operating range, and 265 mA ripple current at 120 Hz. ESR data is not provided for the UVP1H101MPD, and high-frequency ripple current is specified at different test frequencies (50 kHz for 107BPS050M, 10 kHz for UVP1H101MPD).

Q: What does "Not For New Designs" mean for the UVP1H101MPD?

A: This designation indicates the manufacturer (Nichicon) does not recommend this part for incorporation into new product designs. The part remains available for replacement and maintenance applications in existing systems. New designs should prioritize the 107BPS050M or other Active-status alternatives.

Q: Are both parts RoHS compliant?

A: Yes. Both the 107BPS050M and UVP1H101MPD are ROHS3 compliant.

Q: What is the difference in REACH status between these parts?

A: The 107BPS050M is REACH Unaffected, meaning it is not subject to REACH regulatory restrictions. The UVP1H101MPD is REACH Affected, indicating it may be subject to REACH substance restrictions or reporting requirements. Applications operating under REACH jurisdiction should verify compliance requirements before selecting the substitute part.

Q: Can I use either part interchangeably in audio applications?

A: The 107BPS050M is specified for audio applications. The UVP1H101MPD is specified for general purpose applications. Both parts meet the electrical and mechanical requirements for audio circuit implementation. Application-specific performance validation is the responsibility of the design engineer.

Q: What inventory status should I expect for these parts?

A: The 107BPS050M has 996 pieces in stock. The UVP1H101MPD has 1936 pieces in stock. Inventory levels are subject to change and should be verified at time of procurement.