3M 10236-55F3VC D-Sub 36-Position Receptacle Connector Equivalent & Substitute Parts

Part Overview

The 3M 10236-55F3VC is a 36-position D-Sub receptacle connector designed for panel mount, through-hole, right-angle solder termination applications. This connector features a Mini D Ribbon (MDR) form factor with board lock and shielding capabilities. The part is currently obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations.

Substiute Parts

10236-55F3VC

3MIn Stock: 89210236-55F3VC Datasheet

Current PartRFQ

DX10G1M-36S(50)

Hirose Electric Co LtdIn Stock: 898DX10G1M-36S(50) Datasheet

MFR RecommendedRFQ

DX10M-36S(50)

Hirose Electric Co LtdIn Stock: 1246DX10M-36S(50) Datasheet

MFR RecommendedRFQ

DX10M-36SE(50)

Hirose Electric Co LtdIn Stock: 1157DX10M-36SE(50) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 3M 10236-55F3VC are qualified based on the following critical parameters that determine functional equivalence:

• Connector Type & Position Count: All substitutes must be 36-position receptacle connectors
• Mounting Configuration: Panel mount, through-hole, right-angle orientation required
• Termination Method: Solder termination only
• Connector Style: Outer shroud contacts maintained
• Contact Finish: Gold plating for signal integrity and corrosion resistance
• Row Configuration: 2-row arrangement for dimensional compatibility
• Electrical & Environmental Ratings: MSL 1 (Unlimited) moisture sensitivity maintained

The three Hirose Electric Co Ltd alternatives (DX10G1M-36S(50), DX10M-36S(50), and DX10M-36SE(50)) meet these core substitution criteria. These parts represent active product lines with improved compliance status compared to the obsolete 3M original.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The 3M 10236-55F3VC is obsolete, necessitating transition to active product lines. All three Hirose substitutes maintain active product status with ongoing manufacturer support and availability.

Compliance Status: The Hirose alternatives provide improved regulatory compliance. DX10G1M-36S(50) and DX10M-36SE(50) are RoHS3 Compliant or RoHS Compliant, addressing environmental regulations that the original 3M part does not meet. DX10M-36S(50) is RoHS Compliant with REACH Unaffected status.

Functional Equivalence: All three substitutes maintain the core electrical and mechanical parameters required for direct replacement: 36-position configuration, 2-row arrangement, panel mount through-hole right-angle solder termination, gold contact finish, and MSL 1 rating.

Feature Alignment: DX10M-36SE(50) includes board lock feature matching the original part's functionality. DX10M-36S(50) includes latchblocks on the mating side. DX10G1M-36S(50) provides housing/shell M2.6 flange feature. Selection depends on specific mechanical interface requirements in the target application.

Frequently Asked Questions (FAQ)

Q: Can the Hirose DX10M-36S(50) directly replace the 3M 10236-55F3VC in existing designs?

A: Yes. Both connectors share identical core specifications: 36-position receptacle, 2-row configuration, panel mount through-hole right-angle solder termination, and gold contact finish. The DX10M-36S(50) is classified as Miniature High Density (HD) type versus the original's Mini D Ribbon (MDR) designation, but this represents a product line evolution rather than a functional incompatibility. Physical dimensions and electrical performance remain compatible for standard D-Sub 36-position applications.

Q: What is the difference between DX10M-36S(50) and DX10M-36SE(50)?

A: The primary difference is the board lock feature. DX10M-36SE(50) includes board lock functionality, matching the original 3M part's feature set. DX10M-36S(50) does not include board lock but features latchblocks on the mating side. Both are otherwise electrically and mechanically equivalent. Selection should be based on whether board lock is required for the specific application.

Q: Does the contact finish thickness difference affect substitution compatibility?

A: The original 3M part specifies 30.0µin (0.76µm) contact finish thickness. DX10M-36S(50) specifies 11.8µin (0.30µm). Both thicknesses provide adequate gold plating for corrosion resistance and electrical conductivity in standard D-Sub connector applications. The difference does not affect functional compatibility or signal integrity for typical data and power distribution uses.

Q: Are all three Hirose substitutes available in equivalent packaging?

A: All three substitutes are supplied in Tray packaging. The original 3M part packaging is not specified in the technical data. Tray packaging is standard for D-Sub connectors and is suitable for both manual and automated assembly processes.

Q: What compliance advantages do the Hirose substitutes offer?

A: The Hirose alternatives provide RoHS compliance (RoHS3 Compliant for DX10G1M-36S(50) and DX10M-36SE(50); RoHS Compliant for DX10M-36S(50)), whereas the original 3M part is RoHS non-compliant. This is significant for applications subject to environmental regulations in the EU and other regions. All parts maintain EAR99 export classification and MSL 1 moisture sensitivity rating.