07HR-6S-P-N Equivalent & Substitute Parts

Part Overview

The 07HR-6S-P-N is a 7-position rectangular receptacle connector manufactured by JST Sales America Inc. This connector features IDC (Insulation Displacement Contact) termination, tin contact finish, and supports 26 AWG discrete wire. The part is active in production status with RoHS compliance and unlimited moisture sensitivity rating (MSL 1). Alternative components may be required due to supply constraints, regional availability, or specific application requirements.

Substiute Parts

07HR-6S-P-N

JST Sales America Inc.In Stock: 81507HR-6S-P-N Datasheet

Current PartRFQ

2-177534-7

TE Connectivity AMP ConnectorsIn Stock: 9312-177534-7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 07HR-6S-P-N is determined by the following critical parameters:

• Connector Type & Contact Configuration: Must be receptacle with female socket contacts
• Position Count & Pitch: Must maintain 7 positions at 0.098" (2.50mm) pitch in single-row configuration
• Termination Method: Must support IDC cable termination for discrete wire
• Wire Gauge Compatibility: Must accommodate the specified wire gauge range
• Contact Finish: Tin finish required for electrical performance consistency
• Mounting & Fastening: Free hanging in-line mounting configuration
• Environmental Compliance: RoHS compliance and MSL 1 rating

The substitute part 2-177534-7 from TE Connectivity AMP Connectors meets these core substitution criteria through matching connector type, position count, pitch, row configuration, termination method, contact finish, and environmental ratings.

Parameter Comparison

Engineering Selection Recommendations

Both the 07HR-6S-P-N and 2-177534-7 are active production components with equivalent core electrical and mechanical specifications. The 07HR-6S-P-N is RoHS compliant. The 2-177534-7 carries an undefined REACH status from the vendor. Selection between these parts should be based on supply availability, lead time requirements, and procurement preferences. The wire gauge specification for the 2-177534-7 (24-28 AWG) encompasses the 26 AWG requirement of the 07HR-6S-P-N, providing compatibility within the specified range.

Frequently Asked Questions (FAQ)

Q: Can the 2-177534-7 directly replace the 07HR-6S-P-N in existing designs?

A: Yes. Both connectors share identical pitch (0.098"), position count (7), row configuration (1), mounting type (free hanging in-line), termination method (IDC), and contact finish (tin). The wire gauge range of the 2-177534-7 (24-28 AWG) includes the 26 AWG specification of the 07HR-6S-P-N.

Q: What is the significance of the wire gauge difference?

A: The 07HR-6S-P-N specifies 26 AWG discrete wire. The 2-177534-7 accepts 24-28 AWG wire, which encompasses 26 AWG within its operating range. This broader specification does not compromise compatibility for 26 AWG applications.

Q: Are there environmental or compliance differences between these parts?

A: Both parts carry MSL 1 (unlimited) moisture sensitivity rating. The 07HR-6S-P-N is RoHS compliant. The 2-177534-7 has undefined REACH status per vendor documentation. Compliance requirements should be verified against specific application and regional standards.

Q: What connector series are these parts from?

A: The 07HR-6S-P-N belongs to the JST HR series. The 2-177534-7 belongs to the TE Connectivity MIS series. Despite different series designations, both meet the substitution criteria for 7-position, 2.50mm pitch IDC receptacle connectors.

Q: Are there any fastening type considerations?

A: The 07HR-6S-P-N specifies detent lock fastening. The 2-177534-7 does not specify a fastening type in the provided data. Mechanical interface compatibility should be confirmed for applications requiring specific fastening mechanisms.