Molex 0395300213 Terminal Block Plug – Equivalent & Substitute Parts

Part Overview

The Molex 0395300213 is a 13-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 180° free-hanging in-line applications. This component is part of the Eurostyle ESE 39530 series and is rated for 15 A at 300 V (UL). The part is currently active in production with 1065 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters allow direct functional replacement without design modification.

Substiute Parts

0395300213

MolexIn Stock: 11160395300213 Datasheet

Current PartRFQ

1757129

Phoenix ContactIn Stock: 8771757129 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Phoenix Contact 1757129 qualifies as a substitute for the Molex 0395300213 based on the following critical parameters:

• Electrical Compatibility: Both parts support 15 A at 300 V (UL rating), meeting the same current and voltage requirements.
• Mechanical Compatibility: Both are 13-position plugs with 0.200" (5.08mm) pitch, 180° wire entry, free-hanging in-line mounting, and M3 screw termination.
• Physical Dimensions: Both have identical insulation height of 0.591" (15.00mm), ensuring mechanical fit in existing connector housings.
• Termination Method: Both use screw-rising cage clamp termination, allowing direct wire connection without adapter requirements.
• Wire Gauge Acceptance: The substitute accepts 12-30 AWG (0.2-2.5mm²), which encompasses the main part's 12-26 AWG range.
• Regulatory Compliance: Both are ROHS3 compliant with MSL 1 rating and EAR99 classification.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0395300213 and Phoenix Contact 1757129 are active production components with ROHS3 compliance and identical regulatory classifications (EAR99, HTSUS 8536.90.4000). Selection between these parts should be based on:

• Supply Chain Availability: Molex 0395300213 has 1065 units in stock; Phoenix Contact 1757129 has 801 units in stock.
• Electrical Performance: Both meet UL 15 A / 300 V requirements. Phoenix Contact additionally meets IEC 12 A / 630 V, providing extended operational margin in IEC-regulated applications.
• Wire Gauge Flexibility: Phoenix Contact 1757129 accepts 12-30 AWG versus Molex 12-26 AWG, offering broader wire compatibility.
• Screw Torque Specification: Molex specifies 0.56 Nm; Phoenix Contact specifies 0.5-0.6 Nm range. Both are functionally equivalent for M3 termination.
• Housing Color: Molex is black; Phoenix Contact is green. This is a visual distinction with no electrical impact.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1757129 directly replace Molex 0395300213 in existing designs?

A: Yes. Both parts have identical pitch (5.08mm), position count (13), wire entry angle (180°), mounting type (free-hanging in-line), and termination method (M3 screw-rising cage clamp). Electrical ratings (15 A / 300 V UL) and physical dimensions (0.591" insulation height) are identical. Direct substitution is mechanically and electrically compatible.

Q: What is the wire gauge compatibility difference?

A: Molex 0395300213 accepts 12-26 AWG. Phoenix Contact 1757129 accepts 12-30 AWG. The substitute part accommodates a broader range, including finer gauge wires (27-30 AWG) not supported by the main part. For applications using 12-26 AWG, both parts are fully compatible.

Q: Are there differences in screw torque specifications?

A: Molex specifies 0.56 Nm (5.0 Lb-In) fixed torque. Phoenix Contact specifies 0.5-0.6 Nm (4.4-5.3 Lb-In) as a range. The Molex specification falls within the Phoenix Contact range, ensuring compatible termination performance.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both are ROHS3 compliant, MSL 1 rated (unlimited moisture sensitivity), and classified as EAR99 for export control. Both carry identical HTSUS code 8536.90.4000. Regulatory substitution is direct.

Q: What is the difference in wire strip length?

A: Molex specifies 5mm wire strip length; Phoenix Contact specifies 7mm. This affects preparation length during termination but does not impact electrical or mechanical compatibility. Technicians should follow the respective manufacturer's termination guidelines.

Q: Can these parts be used interchangeably in the same connector housing?

A: Yes. Both plugs have identical pitch (5.08mm), position count (13), and insulation height (0.591" / 15.00mm). They are mechanically interchangeable with standard Eurostyle ESE 39530 and COMBICON MSTB series housings designed for 5.08mm pitch, 13-position configurations.