Molex 0190070011 Quick Connect Female Crimp Connector - Equivalent & Substitute Parts

Part Overview

The Molex 0190070011 is a 0.187" (4.75mm) Quick Connect Female Crimp Connector designed for 18-22 AWG wire applications. This fully insulated, angled 90° flag terminal is part of the InsulKrimp series and is classified as obsolete. Due to its obsolete status, identifying functionally equivalent active alternatives is essential for ongoing procurement and system maintenance.

Substiute Parts

0190070011

MolexIn Stock: 8550190070011 Datasheet

Current PartRFQ

0190070009

MolexIn Stock: 83700190070009 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0190070011 is determined by strict equivalence across the following critical parameters:

• Tab Width: 0.187" (4.75mm)
• Tab Thickness: 0.020" (0.51mm)
• Wire Gauge: 18-22 AWG
• Gender: Female
• Terminal Type: Angled - 90°, Flag
• Insulation: Fully Insulated
• Mounting Type: Free Hanging (In-Line), Right Angle
• Termination: Crimp
• Contact Material: Brass
• Insulation Diameter: 0.176" (4.47mm)

Only parts matching all these parameters across the InsulKrimp series are considered direct substitutes. Packaging differences do not affect functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

The Molex 0190070009 is a direct functional equivalent to the 0190070011. Both parts are ROHS3 compliant, carry MSL Rating 1 (Unlimited), and share identical electrical and mechanical specifications across all critical parameters.

The primary distinction is product status: the 0190070011 is obsolete, while the 0190070009 is active. For new designs and ongoing procurement, the 0190070009 is the appropriate selection. The 0190070009 is available in bulk packaging with significantly higher inventory (8260 pcs vs. 840 pcs), supporting production continuity and supply chain reliability.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0190070009 directly replace the 0190070011 in existing assemblies?

A: Yes. Both parts are identical across all functional parameters: tab width, thickness, wire gauge, terminal type, insulation, and contact material. Direct substitution is supported without design modification.

Q: Does packaging affect compatibility?

A: No. The 0190070011 is supplied with unspecified packaging, while the 0190070009 is supplied in bulk. Packaging is a logistics consideration only and does not affect electrical or mechanical performance.

Q: Why is the 0190070011 marked obsolete?

A: Product status reflects manufacturer lifecycle decisions. The 0190070009 remains active and serves the same functional role within the InsulKrimp series.

Q: Are both parts RoHS compliant?

A: Yes. Both the 0190070011 and 0190070009 are ROHS3 compliant and carry MSL Rating 1 (Unlimited), meeting environmental and reliability standards.

Q: What wire gauges are supported?

A: Both parts support 18-22 AWG wire applications with a 0.187" (4.75mm) tab width and 0.020" (0.51mm) tab thickness.