Molex 0022285140 Equivalent & Substitute Parts

Part Overview

The Molex 0022285140 is a vertical through-hole rectangular connector header with 14 positions at 2.54mm pitch. This unshrouded, breakaway header is designed for board-to-board or cable applications in automotive, general purpose, medical, and telecommunications sectors. The part features kinked pin solder termination, tin-plated square contacts, and polyamide nylon insulation rated UL94 V-0. With 813 units in stock and active product status, equivalent alternatives are available from Mill-Max Manufacturing Corp. and Sullins Connector Solutions to support design flexibility, inventory management, and supply chain continuity.

Key Parameters

Parameter	Value
Manufacturer Part Number	0022285140
Manufacturer	Molex
Category	Rectangular Connectors
Connector Type	Header, Breakaway
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	14
Number of Rows	1
Mounting Type	Through Hole
Termination	Kinked Pin, Solder
Fastening Type	Push-Pull
Contact Shape	Square
Contact Finish - Mating	Tin
Insulation Material	Polyamide (PA), Nylon, Glass Filled
Material Flammability Rating	UL94 V-0
Insulation Color	Black
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0022285140 is determined by strict alignment of core electrical and mechanical parameters: connector type (header), contact type (male pin), pitch (0.100" / 2.54mm), number of positions (14), number of rows (1), mounting type (through hole), termination method (solder), fastening type (push-pull), and insulation color (black). All substitute parts listed maintain these critical parameters.

Substitute parts are grouped into two categories based on contact geometry and material composition:

Category A: Mill-Max Manufacturing Corp. (350 and 800 Series) Parts 350-10-114-00-006000, 800-10-014-10-001000, and 800-10-014-10-002000 feature circular contact shapes with brass alloy material and gold plating. These parts differ from the main part in contact finish (gold vs. tin) and insulation material (polycyclohexylenedimethylene terephthalate / PCT vs. polyamide nylon). Contact length variations exist across this group to accommodate different application depths.

Category B: Sullins Connector Solutions (PBC14 and PEC14 Series) Parts PBC14SAAN, PEC14SAAN, PEC14SADN, and PEC14SAGN maintain square contact geometry consistent with the main part. These parts feature phosphor bronze contact material with polybutylene terephthalate (PBT) insulation. Contact finish options include gold (PBC14SAAN) and tin (PEC14SAAN, PEC14SADN, PEC14SAGN). Post length variations (0.120", 0.420", 0.720") enable selection for different PCB thicknesses and stacking requirements. All Sullins parts include specified operating temperature range (-65°C ~ 125°C) and current rating (3A).

Parameter Comparison

Parameter	Molex 0022285140	Mill-Max 350-10-114-00-006000	Mill-Max 800-10-014-10-001000	Mill-Max 800-10-014-10-002000	Sullins PBC14SAAN	Sullins PEC14SAAN	Sullins PEC14SADN	Sullins PEC14SAGN
Connector Type	Header, Breakaway	Header	Header	Header	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	14	14	14	14	14	14	14	14
Number of Rows	1	1	1	1	1	1	1	1
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Kinked Pin, Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Shape	Square	Circular	Circular	Circular	Square	Square	Square	Square
Contact Finish - Mating	Tin	Gold	Gold	Gold	Gold	Tin	Tin	Tin
Contact Finish Thickness - Mating	100.0µin (2.54µm)	10.0µin (0.25µm)	10.0µin (0.25µm)	10.0µin (0.25µm)	10.0µin (0.25µm)	100.0µin (2.54µm)	100.0µin (2.54µm)	100.0µin (2.54µm)
Contact Finish - Post	Tin	Gold	Gold	Gold	Tin	Tin	Tin	Tin
Contact Finish Thickness - Post	100.0µin (2.54µm)	10.0µin (0.25µm)	10.0µin (0.25µm)	10.0µin (0.25µm)	100.0µin (2.54µm)	100.0µin (2.54µm)	100.0µin (2.54µm)	100.0µin (2.54µm)
Contact Length - Mating	0.240" (6.10mm)	0.142" (3.61mm)	0.195" (4.95mm)	0.142" (3.61mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.135" (3.43mm)	0.110" (2.79mm)	0.118" (3.00mm)	0.118" (3.00mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.420" (10.67mm)	0.720" (18.29mm)
Overall Contact Length	0.465" (11.81mm)	0.394" (10.00mm)	0.438" (11.12mm)	0.385" (9.77mm)	0.450" (11.43mm)	0.450" (11.43mm)	0.750" (19.05mm)	1.050" (26.67mm)
Insulation Height	0.090" (2.29mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Insulation Material	Polyamide (PA), Nylon, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT)	Polycyclohexylenedimethylene Terephthalate (PCT)	Polycyclohexylenedimethylene Terephthalate (PCT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)
Insulation Color	Black	Black	Black	Black	Black	Black	Black	Black
Material Flammability Rating	UL94 V-0	Not specified	Not specified	Not specified	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected
Product Status	Active	Active	Active	Active	Active	Active	Active	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	Not Applicable	Not Applicable	Not Applicable	Not Applicable

Engineering Selection Recommendations

All substitute parts maintain active product status and ROHS3 compliance, ensuring regulatory alignment with the Molex 0022285140. REACH unaffected status is consistent across all options.

Mill-Max Manufacturing Corp. Series (350 and 800): These parts are suitable for applications where gold-plated contacts provide enhanced corrosion resistance and contact reliability. The circular contact geometry differs from the original square design. Contact length variations (0.142" to 0.195" mating length) require verification against PCB stack-up and mating connector depth specifications. Insulation material change from polyamide nylon to PCT may affect thermal and mechanical properties in specific environmental conditions. Flammability rating is not specified for these parts.

Sullins Connector Solutions Series (PBC14 and PEC14): These parts provide direct geometric compatibility with square contact shapes matching the original design. PBC14SAAN features gold-plated mating contacts with tin-plated posts. PEC14SAAN, PEC14SADN, and PEC14SAGN offer tin-plated contacts consistent with the original finish specification. All Sullins parts include specified operating temperature range (-65°C ~ 125°C) and current rating (3A), with UL94 V-0 flammability certification. Post length options (0.120", 0.420", 0.720") accommodate varying PCB thicknesses and application requirements. Moisture sensitivity level is not applicable for these parts.

Selection between Mill-Max and Sullins options depends on contact geometry requirements (circular vs. square), contact finish specifications (gold vs. tin), and post length compatibility with target PCB assembly.

Frequently Asked Questions (FAQ)

Q: What are the critical parameters that determine if a part can substitute for the Molex 0022285140?

A: The core substitution parameters are: connector type (header, breakaway), contact type (male pin), pitch (0.100" / 2.54mm), number of positions (14), number of rows (1), mounting type (through hole), termination method (solder), fastening type (push-pull), and insulation color (black). All listed substitute parts meet these criteria.

Q: How do contact shape differences affect compatibility?

A: The Molex 0022285140 features square contacts. Mill-Max parts (350 and 800 series) use circular contacts, while Sullins parts (PBC14 and PEC14 series) maintain square geometry. Contact shape affects mating connector compatibility and insertion force characteristics. Verify that the mating connector accepts the substitute contact geometry before implementation.

Q: What is the significance of contact finish differences?

A: The original part specifies tin plating (100.0µin / 2.54µm) on both mating and post surfaces. Mill-Max parts feature gold plating (10.0µin / 0.25µm), which provides enhanced corrosion resistance in harsh environments. Sullins PBC14SAAN uses gold on mating surfaces with tin posts. PEC14 series parts use tin on both surfaces, matching the original specification. Contact finish selection depends on environmental exposure and corrosion requirements.

Q: How do post length variations in Sullins parts affect application suitability?

A: Sullins parts offer three post length options: 0.120" (standard), 0.420" (extended), and 0.720" (long). Post length determines the depth of solder connection and compatibility with different PCB thicknesses. Standard length (0.120") suits typical 1.6mm PCBs. Extended and long options accommodate thicker assemblies or applications requiring deeper solder penetration. Verify PCB thickness and assembly requirements before selecting post length.

Q: Are all substitute parts compliant with automotive and medical application standards?

A: All substitute parts maintain ROHS3 compliance and REACH unaffected status. Flammability rating (UL94 V-0) is specified for the Molex original and all Sullins parts. Mill-Max parts do not specify flammability rating. For automotive and medical applications, verify that the selected substitute meets specific industry standards and certifications required by your application.

Q: What inventory considerations apply when selecting substitute parts?

A: Current inventory levels are: Molex 0022285140 (813 units), Mill-Max 350-10-114-00-006000 (1,898 units), Mill-Max 800-10-014-10-001000 (2,154 units), Mill-Max 800-10-014-10-002000 (1,358 units), Sullins PBC14SAAN (3,132 units), Sullins PEC14SAAN (2,573 units), Sullins PEC14SADN (1,264 units), and Sullins PEC14SAGN (1,165 units). Inventory availability may influence selection for high-volume production requirements.

Q: Do substitute parts support the same operating temperature range?

A: The Molex 0022285140 does not specify operating temperature range. Sullins parts specify -65°C ~ 125°C operation. Mill-Max parts do not specify operating temperature. For applications with defined temperature requirements, Sullins parts provide documented thermal performance specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message